BOLLUMA Pantograph Rail Track System 2.8X2.8M for Studio Use

Pantograph Ceiling Rail System Accessories: Accessories (Optional): Railing: Can be joined to create longer rails by purchasing the extension connectors Extension Connectors: Used for connecting rails together e.g. connecting one 4.6ft/1.4m section to another to create 9.2ft/2.8m rails Fixing Plates: Used to secure the rails to the ceiling with expansion screws Expansion Screws: Used with the fixing plates to secure the rails to the ceiling Stop Ends: Fits onto the end of the rail to contain the pulleys on the rail system Double Pulley: Used for connecting the ceiling rails to the suspended rails Single Pulley: A four-wheel carriage fitted with 5/8" spigot. Brake loops allow the carriages to be moved and secured with an operator’s pole Cable Pulley: Used to clip back any cables or wires, attached to a runner to avoid snags and pulls Cable Clips: Used to clip back any cables or wires Safety Cable: Quick release clasp to ensure the safety of your equipment. Length: 25.9"/66cm, Load Capacity: 50kg / 110lb Spigot: Can be inserted into a pantograph and used to secure your lighting fixtures Kits: (Optional) Pantograph Kit: 1x Pantograph (2m Extension), 1x Single Pulley, 3x Cable Pulley, 8x Cable Clips, 1x Safety Cable, 1x Spigot (NO Rail System is Included) Rail Kit: 8x Double Rails, 4x Double Pulleys, 10x Extension Connectors, 6x Fixing Plates, 12x Expansion Screws, 8x Rail Stop Ends Complete Rail System: 4x Pantographs (2m Extension), 8x Double Rails, 4x Single Pulleys, 4x Double Pulleys, 3x Cable Pulley, 32x Cable Clips, 4x Safety Cables, 10x Extension Connectors, 6x Fixing Plates, 12x Expansion Screws, 8x Rail Stop Ends, 4x Spigots, 1x Operators Pole